Ventis HEI240 Wood Fireplace Insert with Blower, Unit VB00012

Product Description

The Ventis HEI240 large sized single cast iron door wood burning insert is recommended for heating larger spaces from 500 - 2, 100 sq. ft. The firebox is lined with refractory bricks for better heat distribution. The HEI240 offers non-catalytic combustion technology, and a Stainless-steel secondary-air system which improves gas combustion. This unit has a 8hr Maximum Burn Time, can hold 20" logs, 75,000 BTU/H Max, and is EPA 2020 approved.

Features

2.4 cu. ft. firebox
Heating capacity 850 to 2, 100 sq. ft.
Optimum efficiency : 77%
Non-Catalytic Combustion Technology
Cast Iron Doors
Optimum efficiency : 77%
Emissions: 1.54 g/h
BTU/hr, seasoned cord wood: 75,000

Required option

Choose one faceplate to complete this unit. Not Included, Sold Separately.
Regular faceplate (VBA1550) or Large faceplate (VBA1551).

Appliance Performance

Fuel type	Dry cordwood (16" recommended)
Recommended heating area	500 - 2,100 ft²
Overall firebox volume	2.4 ft³
Maximum burn time	8 Hours
EPA loading volume	2.02 ft³
Maximum heat output-dry cordwood	75,000 BTU/h
Minimum overall heat output rate	14,800 BTU/h (4.34 kW)
Maximum overall heat output rate	28,600 BTU/h (8.38 kW)
Average efficiency-dry cordwood (HHV)	69 %
Average efficiency-dry cordwood (LHV)	74 %
Optimum efficiency	77 %
Optimum heat transfer efficiency	75 %
Average particulate emission rate	1.54 g/h
Average CO	89.4 g/h

Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
This appliance is officially tested and certified by an independent agency.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
Higher Heating Value of the fuel.
Lower Heating Value of the fuel.
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
Carbon monoxyde.

General Features

Premium quality blower included (CFM)	144 CFM included
Certified according to applicable standards	CAN/USA accredited laboratory
Flue outlet diameter	6"
Recommended chimney diameter	6"
Type of chimney	CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height	12"
Overall dimension (Width)	28 1/2"
Overall dimension (Height)	22 7/8"
Overall dimension (Depth)	26 3/4"
Door type	Single, glass with cast iron frame
Door opening size (Width)	17 1/2"
Door opening size (Height)	9"
Glass type	Ceramic glass
Glass surface - W x H	16 7/8" x 10 1/4"
Firebox size (Width)	21"
Firebox size (Height)	11 7/8"
Firebox size (Depth)	14 1/2"
Maximum log length	20"
Log positioning	Loading over width
High-efficiency certified appliance	Yes, EPA 2020 certified
Canadian Standard (safety)	ULC S628
USA Standard (safety)	UL 1482, UL 737
Shipping weight	399 lb (181 kg)
Minimum fireplace opening (Height)	23 3/8"
Minimum fireplace opening (Depth)	15 3/4"
Steel thickness-top	5/16"
Firebox lined with refractory bricks	Yes
Combustion technology	Non-catalytic
Steel thickness-body	3/16"
Baffle type	High quality vermiculite
Stainless-steel secondary-air system	Yes
Minimum fireplace opening (Width)	28 7/8"
USA Standard (emissions)	EPA
Canadian Standard (emissions)	CSA B415.1-10

Product Documents

Installation
Specification
Drawing Dimension
Owner's Manual
Sellsheet

Ventis HEI240 Wood Fireplace Insert with Blower, Unit VB00012

Country

Country